dreambox

Apr 20, 2010 at 17:14 o\clock

accesoires iphone

by: dreambox   Keywords: iphone

Nous Vendons l'accesoires de l'electronique, accessoire portable accessoire iphone 3GS et accessoire jeux PS3,PS2,PSP,Xbox 360 accessoire Wii,etui iphone,Coque iphone,capteur wii,chargeur voiture iphone,clavier ps3,Film Protection écran,chargeur,Batterie,Stylet iphone,LCD Ecran,Câble Data USB,fm transmitter iphone,Support Voiture Neuf IPhone etc.

Disque Dur 20 G0 pour xbox 360 Neuf Cable HDMI Mini pour xbox 360 Cable AV HDMI pour xbox 360 Manette Sans Fil Controller+1x Batterie 3600mAH Rechargeable pour Xbox 360 Ecouteur Casque Xbox 360 Cable transfert xbox 360 Manette Sans Fil noir Controller pour Xbox 360 Manette Xbox 360 USB Micro Guitar Hero World Tour Pour XBOX 360 PS3 Wii Batterie Manette Xbox 360 Sac Sacoche Housse Noir Transport Protection pour Sony PSP 3000/3004 Multi-fonctionnel de Sac Sacoche Noire Pour SONY PSP Slim & Lite Sharp écran LCD Screen+outils pour SONY PSP 1000 fat Sac Housse Etui Case PSP Fat 1000 Facade Coque Remplacement pour PSP Fat 1000+outils gratuits Facade Coque PSP Fat manette chargeur PS3 Manette sans fil Sony PS2 Playstation 2 Dual Shock Manette Vibrantes Filaire pour Analogique Sony PS2 Sac transport Nintendo Wii Batterie Manette Nintendo wii Carte mémoire wii Cable HDTV AUDIO YUV pour NINTENDO WII COMPONENT Cable WII Adaptateur reseau LAN USB internet pour Nintendo Wii Capteur wii Gants de Boxe wii Manette Nintendo Wii Télécommande Manette noir controller pour Nitendo Wii Wiimote Télécommande wii Nunchuk Nintendo Wii Volant Wii Manette Wii Nunchuk Wii tapis wii,tapis pour wii fit,tapis wii family,jeux dance wii Housse LG KC910 Renoir Housse LG KP500 Cookie Housse LG KM900 Arena Accessoires LG KM900 Arena Accessoires LG KU990 KU990i Viewty Housse étui LG KU990 KU990i Viewty Accessoires BlackBerry 9500 Storm Housse étui BlackBerry 9500 Storm Accessoire BlackBerry Curve 8900 Housse étui accessoire BlackBerry Curve 8900 Accessoire BlackBerry Curve 8520 étui BlackBerry Curve 8520 Accessoires PSP Lite Accessoires PSP Slim Accessoires NOKIA N95 étui NOKIA N95 Housse NOKIA N95 Housse NOKIA E71 Accessoires NOKIA E63 Housse NOKIA E63 Housse étui NOKIA 5800 Xpressmusic Accessoires NOKIA 5800 Xpressmusic étui NOKIA E63 Accessoires NOKIA 5230 XpressMusic housse étui NOKIA 5230 XpressMusic Accessoires Samsung M8800 Pixon Coque housse étui Samsung M8800 Pixon Accessoires Samsung M8800 Pixon Housse Samsung F480 Player Style Housse Samsung S3650 Corby Housse Samsung S8000 Jet étui Samsung Player Star Housse étui Samsung S5600 Player Star Housse étui Samsung S5230 Player one Manette PS2 Housse Silicone/Gel iphone KIT PIETON/CASQUE Iphone Manette PS2 Support iphone Voiture USB Cable data iphone Accessoires Samsung S3650 Corby LCD Ecran iphone Stylet pour iphone LCD Ecran iphone Accessoires Samsung Player Star Batterie iphone Chargeur iphone Stylet pour iphone Protection écran Iphone Chargeur iphone Coque iphone Coque iphone Accessoires NOKIA N97 MINI etui nokia n97 mini Accessoires Samsung S8000 Jet Etui iphone Etui iphone Chargeur iphone Protection écran Iphone Chargeur iphone Accessoires PS2 Accessoires PS3 Accessoires PSP Accessoires Xbox 360 Accessoires Wii accessoires iphone accessoires iphone 3gs Accessoires Iphone Accessoires Nintendo Ds Accessoires Nintendo Ds Lite Accessoires Wii Accessoires Nintendo Dsi Accessoires PS2 Accessoires PS3 Accessoires PSP Accessoires Xbox 360 Accessoires Samsung S5230 Player one Accessoires Portable Nokia Accessoires Portable LG LG KU990 Viewty Accessoires portable HTC Dreambox 500C Dreambox 500S Dreambox 800 HD dreambox 800 Accessoires LG KU990 Viewty Laptop Keyboard Dell Laptop Keyboard
1. Qui sommes nous ?

Accessoiresfr.com, votre spécialiste en accessoires pour téléphone mobile, iPhone et consoles de jeux vous propose une vaste gamme de produits additionnels adaptés à vos portable ou consoles.

2. Livraison rapide

Pour cela que nous sommes au plus près géographiquement de nos fabricants et de leurs usines ce qui nous permet d'être réapprovisionner rapidement mais également de diminuer nos frais de livraison et ainsi nous pouvons baisser également le prix des objets proposés.

3. Service client en direct par tchat.

Vous pouvez nous contactez n'importe quand et n'importe où en vous rendant simplement sur notre site et en utilisant le service de relation client en live.

4. Simplifier les importations pour l'électronique

Nous pouvons vous simplifier la procédure d'importation et d'exportation en  offrant à vos clients un suivi ce qui vous fera économiser de temps et de l'argent. L'importation de produits électroniques et accessoires est maintenant aussi simple qu'un achat auprès de distributeurs locaux.

5. Dropship dans le monde

Notre dropship dans le monde entier pour nos clients et de pratiquement éliminer leurs coûts de logistique. Le meilleur de tous, nous faisons cela gratuitement. car nous pensons qu'il s'agit d'un service vital pour les start-up les détaillants et les e-commerçants.

6. Services à Valeur Ajoutée

Nous offrons l'Impression de votre Logo, le design d'emballage, mais également la possibilité de commander des lots importants pour permettre à nos clients de créer leurs propres marques avec un faible investissement.

Feb 25, 2010 at 19:38 o\clock

Dreambox Cardsharing

by: dreambox

7 Cardsharing
7.1 Basics
How does it work I suggest you begin with the Hydra Installation part first, as it gives some basics on the two mains EMUs.
Basically, instead of sending commands and getting back answers from the official card locally in the local card reader, datas are sent through the network to the other dreambox which has the card.
So, we have a server, with the card on one dreambox, which is waiting for client(s) to connect. Then you have one client running on both dreambox 800HD, sending commands and awaiting answers to the server, which forward to the card.
You imagine easily this is a bit more complex, but this is the global idea.
Of course, if you want to try that, you need 2 dreambox on a single network, Ethernet crossed cable in direct connection, or through a hub.
Let's start with a easy-to-setup share, that you can easily set up with 2 dreambox.
For this example I choosed the standard dreambox7000, plus the wonderful Dreambox500, which costs about a third of the DM7000+HD but offers the same features on channel view and decoding

7.2 Radegast on Hydra

I start with this method, as it's the easiest to set up, everything is done with the remote control.
I clearly suppose you have Hydra installed an running on both dreambox.
We set up on IP 192.168.0.24 the server with the official card on the DM7000, and the 192.168.0.25 for the client in your bedroom, on the DM500.
Telnet to one dreambox and ping the other, this must work with small latency.
0.6 ms is a standard latency on a LAN.
Hydra Angharad & Zeus and Radegast 3 b14 are used for this tutorial.

Let's configure the DM7000 server :
Blue Button, choose radegast, then press OK.
You first need to enable the card reader where you put your official card. Let's allow both top and bottom slots. let ports on default values.
Also tick "multiple connections" as two clients will connect on it.


Put ECM and EMM to "both", keep default settings for Timeouts.
At this stage do not tick "Server Authentification Enabled". This allow login/password and crypting securities, but keep it simple at the beginning.

Just press the green button to validate this last page, then to validate the general settings page, then to confirm you understand that's the Emu needs to be start again, then again the green button to start (or re-start) Radegast.
Press the Lame button (or exit depending your remote control) and that is , you are ready on the server side.
Now, change to the other dreambox, the DM500,, to configure the client. Blue button, choose Radegast and press Ok to enter settings pages.
On this dreambox, no card inserted, so just let Disabled on the three card readers, and no reason to tick "Multiple Connection" here.


Press the yellow button to access the next page.
Put ECM and EMM to "both", keep default settings for Timeouts.
At this stage do not tick "Server Authentification Enabled" as we did not choose to use that on the server. Again, keep it simple at the beginning.
Press the green button to exit to the previous page.
Press the blue button to access the next page.
Here we are going to tell to the radegast client where it can find the server, and for which type of card etc..
So, choose the type of card you have in the server, SECA here, then the IP address of your server, 192.168.0.24 here and the port to be used, 678 here.
Do not use the "Auth" button, this is for login/password and key for crypting, and we don't use it here.
As usual now, press the green button until you start radegast.
You can select a crypted channel and you should have the clear picture on your TV. That's is, you've done your first CS.
To finish this chapter on radegast, if you prefer to secure a bit your data transmission, with all your personal datas on decrypting your provider, you should better tick "Server Authentification Enabled" on both side, server and client.
On the client you have a simple way to configure it by clicking on "Auth" button.
So, put Login, password and a 16 digit key for crypting.
You of course need to put the same on the client side.

On the server you first need to tick "Server Authentification Enabled" using the Hydra Menus.
But you also need to configure login/password access to the server, and this is not included in Hydra Menus.
So you need to edit config files.
FTP to /var/etc/ and get radegast****ers
Edit it with a Unix compatible editor like UltraEdit, and simply put loginasswordESKey
in our case, simply klona:secret:0102030405060708
That's it, your server is configured.
The only default is that you absolutely need radegast on both side, and that radegast is slower than newcamd when it comes to zap time.
One small trick also is to change your EMU for MGcamd, which will use all Radegast config but is faster on zapping and also stable.
So let's move on a newcamd config, more complex, but faster and where you can use both radegast and newcamd server with a newcamd client.

7.3 Newcamd

Newcamd is another solution. Newcamd 5.25 is used for this tutorial. Be cautious, as the CS protocol changed with this version and you CANNOT share between newcamd 5.25 and older versions.
First have a look at the Hydra installation part to get some basics on newcamd.
So, we need to configure first cardserver.dream (/var/tuxbox/config/cardserver.cfg is the associated config file) and the client newcamd.ppc (/var/tuxbox/config/newcamd.cfg is the associated config file).
Filename used here are those used on Hydra images and it can change from one image to another. Mainly other than Hydra images, like Rudream, simply use newcamd and cardserver as filename. Have a look to /var/bin to find the correct filename for your image.
First job is to configure the server part.
So first edit the file cardserver.cfg from the DM7000
First step is to allow Auto Update for the card, and enable card readers to work, so at the end of the file you must have :
SERIAL_PORT = 0
TCP_PORT = 10001
EMM-G = yes
EMM-S = yes
EMM-U = yes
SPECIAL_FEATURES = yes
SERIAL_PORT = 1
TCP_PORT = 10000
EMM-G = yes
EMM-S = yes
EMM-U = yes
SPECIAL_FEATURES = yes
Then you need to set up network and security settings :
DESKEY = 12 34 56 78 90 12 34 56 78 90 12 34 56 78
SERVER_NAME = My_Server
DEBUG_PORT = 14000
ENTITLEMENT_PORT = 14001
ADMIN_PORT = 14002
ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Just put the DES key you want and a unique server_name on the network. Be careful, there cannot be two server with the same name in the network.
Last point is to add clients authorized to connect and which password logging they need.
You need to build a line for each user like this : USER = login password wan IP_client admin_port au. In our case, we have the server dreambox that will connect to itself and the second dreambox with klona as login and secret as password, the client IP is 192.168.0.25 :
USER = local local lan localhost 12000 au
USER = klona secret wan 192.168.0.25 12000 au
In fact, if you get together all these lines, you have a simple working cardserver.cfg file :
DESKEY = 12 34 56 78 90 12 34 56 78 90 12 34 56 78
SERVER_NAME = My_Server
DEBUG_PORT = 14000
ENTITLEMENT_PORT = 14001
ADMIN_PORT = 14002
ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00
USER = local local lan localhost 12000 au
USER = klona secret wan 192.168.0.25 12000 au
SERIAL_PORT = 0
TCP_PORT = 10001
EMM-G = yes
EMM-S = yes
EMM-U = yes
SPECIAL_FEATURES = yes
SERIAL_PORT = 1
TCP_PORT = 10000
EMM-G = yes
EMM-S = yes
EMM-U = yes
SPECIAL_FEATURES = yes

Now let's configure the client newcamd.ppc (with his associated settings file newcamd.cfg) , on the dreambox server, so still the DM7000.
There are quite some line in this file, but you only need in fact to add the details to connect to the server.
Line that define everything are built that way : CWS = server_IP server_port login password DESkey wan cardserver_name. In this case, the server connect to itself on port 10000 and 10001 (the 2 card readers we authorized) and login/password is local/local and the cardserver name is My_Server, so :
CWS = localhost 10000 local local 12 34 56 78 90 12 34 56 78 90 12 34 56 78 wan My_Server
CWS = localhost 10001 local local 12 34 56 78 90 12 34 56 78 90 12 34 56 78 wan My_Server
localhost returns the local internal IP that is 127.0.0.1, that also can be used directly in the config file. In our case, we can also change the IP to 192.168.0.24 as this is another valid IP address of the dreambox. It's better anyway to use 127.0.0.1.
Just check now you have CWS_INCOMING_PORT = 12000 in the end of the file.
I did not yet explain about this port that is in the cardserver config and in the newcamd config. Sharing is done on ports 10000 and 10001, so what is the port 12000 used for In easy terms, it's the way to send data back to the server.
It's useful when the server was down and get online again, after a reboot for example; Through this port, the server tell to clients that it's back online. This way, the client does not have to reboot or restart the EMU newcamd to get again access to the server.
Let's now move on the client dreambox, the DM500, and configure newcamd. Edit the other newcamd.cfg (I suggest you make separated directories on your PC with clear names like server_192_168_0_24 and client_192_168_0_25 or you will probably mix files and nothing will work !)
This time, we need to connect on 192.168.0.25 , ports 10000 and 10001, login/password is klona/secret, DESkey is the same, and server name also.
CWS = 192.168.0.24 10000 klona secret 12 34 56 78 90 12 34 56 78 90 12 34 56 78 wan My_Server
CWS = 192.168.0.24 10001 klona secret 12 34 56 78 90 12 34 56 78 90 12 34 56 78 wan My_Server
Still check CWS_INCOMING_PORT = 12000 in the end of the file.
That is, both clients and server are configured. This should work once you put your official card inside the server dreambox.
Anyway, there is still again an improvement we can do. What about a third dreambox , but this time with a radegast server.

7.4 : Radegast server and Newcamd client

Our third dreambox has the IP address 192.168.0.99 and is a DM7000
So, just configure normally your radegast server on this new dreambox7000 as explained in the previous part .
Just untick "Server Authentification Enabled" as radegast is only able to handle one client in crypted DES mode.

Let's move now on the two clients configuration, the first DM7000 and the DM500. Newcamd and radegast are not directly compatible in sharing. We are going to use a radegast code to convert data to newcamd format. For this purpose, copy from the original newcamd package the file radegast.ppc from the radegast folder to /var/bin and change attributes to 755. If you don't know what means "chmod 755" check here.
Then copy from the same folder of the newcamd package the file radegast.cfg to /var/tuxbox/config and NOT to /var/etc which is the standard directory for radegast EMU config files. In this case, this is not the radegast EMU but the radegast converter for newcamd that we use. Quite confusing isn't
Let's configure the radegast converter for the first client, the dreambox DM500 192.168.0.25 that has no card at all, already client of the cardserver.dream on the 192.168.0.24 dreambox. FTP /var/tuxbox/config/radegast.cfg and edit the file.
Here is what you need in this file :
SERVER_NAME = rdgd_server
DESKEY = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
DEBUG_PORT = 15000
RADEGAST_SERVER_CONNECT_TIMEOUT = 40
CLIENT_CONNECT_TIMEOUT = 30
USER = internal share localhost 12000
CARD = 0100:00246A
TCP_PORT = 16001
RADEGAST_SERVER = 01:0:192.168.0.99:678:0
DEBUG = yes
We use a zero DESkey as it is purely local, USER allowed is in fact the local newcamd client only, with internal as login and share as password, on port 16001, and connect to the radegast server on 192.168.0.99, port 678, that share a card type 0100 (seca) for the provider 00246A
We now need to add a server to connect to newcamd , so edit newcamd.cfg from dreambox 192.168.0.25
Simply add :
CWS = 127.0.0.1 16001 internal share 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lan rdgd_server
Last thing to do is to start the radegast converter. Either manually by telnet and /var/bin/radegast.ppc &, or by adding this line into /var/etc/init.
Do not forget the "&" and use a Unix editor like UltraEdit or your dreambox won't boot anymore...
In fact you just need to do the configuration on the other dreambox which is already a newcamd server, the 192.168.0.24.
So to summarize.
On the DM500 192.168.0.25, no card inserted, newcamd connects to the newcamd server of the 192.168.0.24 dreambox and to local radegast converter which connects to the radegast server of the 192.168.0.99
On the DM7000 192.168.0.24, 1 card inserted, newcamd connects to the local newcamd server and to local radegast converter which connects to the radegast server of the 192.168.0.99
On the DM7000 192.168.0.99, 1 card inserted, the radegast client connects to the local radegast server and that's all.
This seems quite nice, but some radegast sharing cannot be converted to newcamd, mainly because newcamd do not support every provider.
So there is still one other solution, explained in the next part.

B]7.5 : Newcamd and Evocamd


On this tutorial we use EvoCamd 4.1 which is compatible with newcamd 5.25 CS protocol. If using older versions of newcamd, you need to use evocamd 4.0.
The idea is to use evocamd as client, as it's able to connect directly to a radegast and a newcamd server, while serving with cardserver.dream from newcamd package.
You can use the cardserver.dream configuration from the 7.3 part as there is no difference on the server.
You then need to configure evocamd as client on the 2 other dreambox. Evocamd client , whatever dreambox is concerned, will connect to the radegast server from the 192.168.0.99 dreambox, and from 192.168.0.24 for the newcamd sharing.
Newcamd sharing are defined in /var/key/newcamd-client.txt
[192.168.0.24] #Newcamd server
port = 10000
key = 12 34 56 78 90 12 34 56 78 90 12 34 56 78
username = klona
password = secret
Radegast sharing are defined in the standard radegast config file, /var/etc/radegast.cfg (NOT the /var/tuxbox/config/radegast.cfg this time !!)
net routes = 1
net route 1 = 05::192.168.0.99:678:0:::
05 is the CAID for Viacess. If you have some trouble with this config line, simply use the radegast config display of radegast as explained in the part 7.2, client configuration . It will create the line for you. You can edit the file after and check what is inside, modify or complete it but it gives a nice hand to start with.
That's it. Simply use these config files in the dreambox 192.168.0.24 & 25.

Telnet to dreambox DM7000 192.168.0.24 :
- kill old processes that can run
Killall newcamd.ppc
killall radegast.ppc
killall cardserver.dream

- Start the newcamd server
/var/bin/cardserver.dream &

- Start evocamd client
/var/bin/evocamd.ppc &

Telnet to dreambox DM500 192.168.0.25 :
- kill old processes that can run
Killall newcamd.ppc
killall radegast.ppc
killall cardserver.dream

- Start evocamd client
/var/bin/evocamd.ppc &

Telnet to dreambox DM7000 192.168.0.99 :
- kill old processes that can run
Killall newcamd.ppc
killall radegast.ppc
killall cardserver.dream

- Start radegast server
/var/bin/netpilot 678 666 &

- Start radegast client
/var/bin/rdgd &

Or easier, use the EMU interface of Hydra
to restart Radegast client & server.

Jan 12, 2010 at 18:24 o\clock

DreamBox 800 HD multimedia.TV Specifications

by: dreambox

DreamBox 800 HD multimedia.TV Specifications:
The Latest in the Dreambox series. The infamous Dreambox 800 HD. The first Linux receiver to have High Definition and Hard Disk capability. Its a very Powerful Receiver for Digital TV and Radio programs. Main features are a 300Mhz Processor, Linux TV DVB-S2 API to view HDTV, 10/100Mbit compatible Ethernet Interface, DVI Connector, plug and play Tuner, Brilliant OLED display, and SATA for use of internal HDD 2.5?and eSATA.

- 300 MHz MIPS Processor
- Linux Operating System
- OLED - Display
- MPEG-2 / H.264 Hardware decoding
- Tuner: DVB-S, optional: DVB-C, DVB-T
- Tuner Module, Plug&Play
- 1 x Smartcard-Reader
- V.24/RS232 Interface
- 10/100Mbit Ethernet Interface
- 1 x Scart (RGB, FBAS or S-Video)
- DVI
- 2 x USB 2.0
- analog modem
- S/PDIF Interface for digital bit stream out (AC-3)
- 64 MByte Flash, 256 MByte RAM
- SATA
- for use either as internal SATA HDD 2,5''
- or to use for extern eSATA

- unlimited channel lists for TV/Radio
- channel-change time < 1 second
- automatic service scan
- directly bouquet-lists
- EPG (electronic program guide)
- multiple LNB-Switching control (supports DiSEqC)
- OSD in many languages and skin-support
- Videotext Decoder
- extern 12V power supply

Jul 15, 2009 at 11:29 o\clock

Dreambox 500c Specifications

by: dreambox

  Dreambox 500c Specifications:

The DM500C is the smallest digital Linux SetTopBox based receiver with card sharing function.

1. 250 MHz IBM PowerPC Processor (350 Mips) - Linux Operating System
2. 1 x Smartcard-Reader
3. MPEG2 Hardware decoding
4. Common available NIMs (DVB-S, DVB-C)
5. V.24/RS232 Interface - 2 LED status
6. Unlimited channel lists for TV/Radio
7. Channel-change time < 1 second
8. Full automatic service scan
9. Supports directly bouquet-lists (indirect unlimited)
10. Supports EPG (electronic program guide)
11. Supports multiple LNB-Switching control (supports DiSEqC)
12. Fully adaptable OSD in many languages (skin-support)
13. SPDI/F Interface for digital bit stream out (AC-3 / DTS)
14. 1 x Scart-interfaces (fully controlled by software)

DreamBox 500s DBS-Tuner:

Input Symbol rate 2 .. 45 Mbaud/s, SCPC / MCPC
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
Roll-off Factor 35 % Demultiplexing according ISO 13818-1

 

Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible
Video Standard PAL G/ 25 Hz
Video Formats 4:3 / 16:9 Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
Letterbox precolating for 4:3 TV-Device

Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub),
Stereo Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output analog:
Output Level L/R 0,5 Vss o-n 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB

Output digital:
Output Level 0,5 Vss o-n 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical (AC3)

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB o-n 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:
Output: FBAS,RGB,S-VHS over OSD selectable

Serielle Interface RS 232:
Typ RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function Update of Firmware and Preprogramming

Ethernet: 100 MBit compatible, bi-direktional interface
Function Update of Firmware and Preprogramming

Physical specification:
Ambient Temperature +15��C...+35��C
Humidity < 80%

Jul 15, 2009 at 11:24 o\clock

Find a new good shop for dreambox.

by: dreambox   Category: dreambox

Dreambox-500s.com is an manufacturer for all over the world such as USA,UK,canada,Ireland,Spain, We supply digital satellite receiver DreamBox 500S, DreamBox 500,DreamBox 600c PVR, DreamBox 7020S, DreamBox 7025,dreambox 800hd,DreamBox Remote Controls and so on.

The Dreambox DM 500-Si is the first Linux based DVB Receiver. This receiver runs on open-source software developed by hundreds of developers around the world. This is the ultimate machine. It has many differnet skins that can be applied to make the user experience completely customizable. If you're looking for a VERY powerful Dreambox DM 500-Si, and something to have fun on, this is Dreambox DM 500-Si for you.

This unit has a great EPG and supports Personal Video Recording. You can attach this unit to your Windows based network at home and record your favourite tv programs right onto your hard drive.

DreamBox DM 500-Si :
The DM500Si is the smallest Linux satellite TV receiver, with 1 x Smartcard-Reader.

250 MHz IBM PowerPC Processor (350 Mips)
2 LED status
Linux Operating System
Full automatic service scan
Supports directly bouquet-lists (indirect unlimited)
Supports multiple LNB-Switching control (supports DiSEqC)
1 x Smartcard-Reader
Unlimited channel lists for TV/Radio
SPDI/F nterface for digital bit stream out (AC-3 / DTS)
MPEG2 Hardware decoding
Channel-change time < 1 second
Fully adaptable OSD in many languages (skin-support)
100Mbit full duplex Ethernet Interface
Supports EPG (electronic program guide)
1 x Scart-interfaces (fully controlled by software)

Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible
Video Standard PAL and NTSC
Video Formats 4:3 / 16:9
Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
Letterbox precolating for 4:3 TV-Device Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard
TV-Scart:
Output: FBAS,RGB,S-VHS over OSD selectable
DBS-Tuner:
Frequency Range 950 .. 2150 MHz
Signal Level - 65 dBm .. - 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK
Input Symbol rate 2 .. 45 Mbaud/s, SCPC / MCPC
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
Roll-off Factor 35 %
Demultiplexing according ISO 13818-1

Ethernet:
100 MBit compatible, bi-direktional interface
Function Update of Firmware and Preprogramming

LNB Power and polarisation:
LNB Current 500mA max. ; short-circuit-proof
LNB Voltage vertical < 14V without load, > 11,5V at 400mA
LNB Voltage horizontal < 20V without load, > 17,3V at 400mA
LNB shut-off at Standby-Mode

Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control

Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical (AC3)

Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB

Serielle Interface RS 232:
Typ RS232 bidirectional
Bit rate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function Update of Firmware and Preprogramming

Power consumption:
< 10W / 12V

Input voltage:
DC12V,alternating acurrent +/- 15%

Extern power supply:
Input:
110-240V AC / 50-60Hz / 0,6A
Output:
12V = / 1A

Others:
Ambient Temperature +15°C...+35°C
Humidity < 80%